Specialists in Outdoor Cleansing Equipment

At 1,724 kilos, the 600HD is H. Barber & Sons' largest SURF RAKE beach cleaner. It has been successfully used in a variety of municipal applications. Cleaning up to seven acres an hour with its 1.83m wide conveyor, the 600HD has the greatest cleaning capacity of any beach cleaner. The 1.5 cubic metre hopper can lift up to 1,678 kilos of material and dump its contents hydraulically from a height of 2.44m.

Specifications:

Hydraulic Drive:	Completely sealed and protected by full flow filter. Large capacity spline mounted pump, hydraulic motor, flow control, and built-in overflow protection.
Hydraulic Flow:	55 litres per minute
Hydraulic Capacity:	59 litres
Cylinders:	Lift 3½ x18" single acting  Trip 2' x 5' single acting
Conveyor:	Of bar flight type, covered with continuous 2.14m wide belt, and mounted thereon alloy spring tines.
Hopper:	2.3 cubic metre (2,000 kilos cap)
Dump Height:	2.75m
Tires:	36 x 13.5 x 15 high flotation design
Operating Speeds:	1.0 to 15.0 miles per hour
Cleaning Width:	2.14m
Cleaning Depth:	Adjustable to 153mm
Dimensions:	H: 2.31m -  L: 3.99m - W: 2.31m
Weight:	Approximately 1,800 kilos
Paint:	Dupont IMRON® Polyurethane enamel
Performance:	Cleans 2 to 7 acres per hour
Tractor Requirements:	60 PTO horsepower 4-wheel drive agricultural type tractor with 76cm rear wheels.
Other Tractor Requirements:	540 RPM rear PTO, 3 point hitch and 1 remote hydraulic valve with raise, hold, and float positions.  This is a general guideline. Larger or smaller tractors may be used depending on beach conditions.
Debris Removed:	Broken glass, plastic, syringes, cigarette butts, pop-tops, straws, cans, tar balls, stones 12mm to 111m in diameter, sea grass, sea weed, fish, small pieces of wood.